NEWS AND TRAINING

Category: New ToolsReturn

2015
07.24

eForce Ram Gets The Angled V-Head

Category: Equipment, New Tools / Tags: no tag / 0 Comments

We are proud to announce the current availability of the Angle V-Head for the eForce Ram System.  Find more information here.

Looking to see this patented design in action, look here.

avhead-web

2014
01.20

C165 Battery Cutter

Category: Equipment, New Tools, Video / Tags: no tag / 0 Comments

NEW !

Power, Speed, Lightweight, NON-Proprietary 28 volt Milwaukee Battery.  The eForce C165 cutter is offered from Genesis Rescue with a limited lifetime warranty.  This amazing tool also runs on a 28 volt Milwaukee battery.

2014
01.19

2013 Benz vs. Eforce C185

Category: Equipment, New Tools / Tags: no tag / 0 Comments

MG_5333_apillar-300x...
The vehicle in this photograph is a 2013 Mercedes Benz E-Class. The A-post of the vehicle was cut with a eforce C185. As you can see this is a monster piece of material. The section that we cut from the A-Post was only about 7 inches but weighed at least 4 lbs. The cutter managed all this with Genesis NXTgen replacement blade inserts.

We will post a video soon.

2014
01.15

Battery Combi Tool 14C

Category: New Tools / Tags: no tag / 0 Comments

2013
08.30

EFORCE 11C

Category: New Tools / Tags: no tag / 0 Comments

2012
08.07

E Force C236 NXTgen!

Category: New Tools / Tags: no tag / 0 Comments

2012
04.20

New Eforce Tools at FDIC 2012!

Category: New Tools / Tags: no tag / 0 Comments

2012
04.19

NXTgen Blades at FDIC 2012!

Category: New Tools / Tags: no tag / 0 Comments

2012
01.26

New E FORCE tools are out!

Category: New Tools / Tags: no tag / 0 Comments

Check out the new line of battery driven hydraulic rescue tools from Genesis!

2011
12.27

Watch All 9 Cut Boron B Post

Category: New Tools, Training / Tags: no tag / 0 Comments

Genesis All 9 cutter in Ohio at demonstration

2011
09.19

NXTgen Blades are Here!

Category: New Tools / Tags: no tag / 0 Comments

Check out the new NXTgen blade insert technology from Genesis!  Watch as we cut some of the hardest vehicles on the road today. Another innovation! The NXTgen blade inserts are a new technology from Genesis Rescue Systems. Designed with the new Boron and Ultra High Strength Steels in mind, the NXTgen blades are made to be replaced to keep a sharp cutting edge. Sharp blades cut much better than dull blades, and also protect your blades from catastrophic failure keeping replacement costs to a minimum. The blade inserts are a cost effective way to keep performance of your cutter near 100%, and can be changed by rescue personnel on scene in a matter of a couple minutes with simple tools. Check out the video to WATCH us cut Boron and UHSS!